October 15, 2019, 6:33 am
@berabaskurt wrote:
Hey everyone,
This is an issue that I am dealing with since started using Rhinoceros 6. I use Rhinoceros for creating technical drawings, or documents that may be considered as data-sheets in a simpler way. Since I am much more comfortable with Rhino, I create all my elements like text etc. in it and then export an Illustrator file to continue working on. But exporting to ai deletes all paragraph formatting and set default position to lower left.
On left you can see Rhino attributes for texts, on the right notice little orange squares placed lower left which means all text are aligned left instead of center. And changing font, text, size, or making them bold or italic completely makes it a mess. I searched the settings and forums and couldn’t find a solution. It was not working that way in Rhinoceros 5 and early betas as far as I remember.
Posts: 3
Participants: 2
Read full topic
↧
October 16, 2019, 4:10 am
@atelierkanal wrote:
Hello,
we are trying too get more shadow into our images by the use of Sun and an Environment map also used for the Skylight emittance. Adjusting the colour of the shadows in the display mode settings to a darker colour also brings out more of the white fog on the ceiling. Is there a way we could get rid of this white, apparently shadow, emittance?
Kind regards,
Nils
Posts: 1
Participants: 1
Read full topic
↧
↧
October 16, 2019, 5:36 am
@antoine wrote:
Hello,
Using actually many layout, I have some questions:
-
WISH Will be a way to organize layout by folder, to avoir managing a long list of layout? Could we image having Usertext linked to these folder, so a folder name could be retrieve as text in a layout depending of its folder? As folder name…
-
BUG In workspace, activating a sublayer in a non activate layer, is not allowed, but into layout space, it is allowed, but parent layer stay deactivate…and result is show into layout, we can work on it, but it does not stay active if we change of active page. So it is needed to do not allow it, as in workspace.
-
WISH…or maybe it already exist, to have a layout space not only rectangular, as trimming a layout , or using poly line as a layout frame?
-
WISH I am looking into options a way to change color of active frame, because actually it is just a bold line without different color, and it is not user friendly, on Retina screen, hard to see difference between regular and bold.
-WISH On print menu, we can print ALL and FROM >TO… could we add ACTIVE page?
Thank you for all your help.
Posts: 1
Participants: 1
Read full topic
↧
October 16, 2019, 9:46 am
@kalmdown wrote:
When I Export a viewport I would like it to respect the Display Mode:
Am exporting this:
![image]()
And getting this:
![image]()
Often really just want the silhouettes when working in 2D.
Posts: 2
Participants: 2
Read full topic
↧
October 16, 2019, 12:46 pm
@a.p.haythornthwaite wrote:
Hello,
I have finally updated to rhino 6 for Mac, and have come across an issue which I trust someone can help me resolve.
When printing to PDF, all my crvs become terribly distorted. I never had any issue with rhino 5 doing this, so I assume this should not be too hard to resolve?
here attached a screen grab of how some circles and leaders come out,
Thanks,
Andrew
Posts: 6
Participants: 2
Read full topic
↧
↧
October 17, 2019, 1:17 am
@a.p.haythornthwaite wrote:
I have recently upgraded to Rhino 6, and continue to have issues.
There seems to be a bug with Rhino 6, whereby in the ortho viewports [top, front, right], it is not possible select all objects, in particular dimensions.
what I am finding is that if I have a model, and I make dimensions on the part in the front view, and then when I got to select all the objects in the top view [by left click and drag over all the parts], it does not pick up the dimensions that where made in the front view. I am able to resolve this by selecting all the parts in a perspective view, however this seems like a bit of a strange work around to have to do…
I have not had this issue in the Rhino for, and hoping this is just a preset?
Posts: 1
Participants: 1
Read full topic
↧
October 17, 2019, 3:29 am
@atelierkanal wrote:
Hello,
is it possible with the Insert command to place the geometry at the exact same place as it is in the external file? The files share the same locations and I would like to update a part that was being worked on in a copy file.
Posts: 6
Participants: 4
Read full topic
↧
October 17, 2019, 3:32 am
@encephalon wrote:
in version 5 when i put a polygon or any other closed curve, polyline exactly on the surface of a cube, go to front view select the polygon and use trim to trim a hole in to both parallel walls it works, in rhino 6 the 2nd trim deletes the entire object instead. it works when i move the curve polygon whatever away from the surface.
Untitled.3dm (2.7 MB)
Posts: 1
Participants: 1
Read full topic
↧
October 17, 2019, 3:44 am
@tommypoole wrote:
All of a sudden today the layout window is just showing a blank grey screen - I have restarted, checked for updates made a new document but nothing is working any ideas on how to get it to work again? Kind of need it today for work eek.
Posts: 2
Participants: 1
Read full topic
↧
↧
October 17, 2019, 8:09 am
@bza_biz wrote:
Rhino in Dark Mode looks terrible unfortunately.
Is there any way to run Rhino in light mode without switching the whole UI color scheme system wide?
Posts: 2
Participants: 1
Read full topic
↧
October 17, 2019, 2:05 pm
@annamlis99 wrote:
Hi, I’m trying to make the fillet less obvious so that the transition between the two cylinders is more smooth. Is there a way to make the fillet more subtle than in the images that I attached? I also tried using the blend tool but didn’t get great results.
Any help would be appreciated.
Posts: 2
Participants: 2
Read full topic
↧
October 18, 2019, 4:56 am
@bza_biz wrote:
How do I add cycles as a render engine for Rhino?
I thought it was integrated for V6?
Posts: 3
Participants: 2
Read full topic
↧
October 18, 2019, 8:49 am
@petumatr wrote:
Hi guys,
I have problems with rotating and mirroring blocks. I know this issue from windows. When I try to rotate with a shift, ortho and gumball, it refuses to rotate and give a message ùnable to transform´in the command line. The same happens when trying to mirror the block. Anybody experiencing the same?
Petr
Posts: 1
Participants: 1
Read full topic
↧
↧
October 19, 2019, 2:48 am
@Gijs wrote:
When using draftangle analysis, the colors correspond to the opposite boxes on the mac. See and compare with windows:
mac:
Posts: 1
Participants: 1
Read full topic
↧
October 19, 2019, 8:26 am
@Alexia wrote:
Hi,
I have installed Rhino 6.18.19266.13352, 2019-09-23) with macOS Catalina and it does not work. When I open Rhino there is no problem, but when I want to create a new file is switch off. Please could you tell me if there is no compatibility on both?
Thanks for your help
Posts: 1
Participants: 1
Read full topic
↧
October 19, 2019, 2:22 pm
@Gijs wrote:
Title says it all, just like in the windows version. This one bugs me all the time when I work on the mac.
In windows, for example I click an arrow, type a certain number followed by space to confirm. On the mac it types a space
Posts: 1
Participants: 1
Read full topic
↧
October 20, 2019, 1:22 pm
@olotimi17 wrote:
Hallo reader,
I downloaded the test version from Rhino (Mac) and therefore I’ve got an license key. After typing in the the keywords and pressing “OK” the sentence: “The Rhino for Windows license key you entered is not valid in Rhino for Mac” shows up which is false. Unfortunately Rhino does not recognize that I downloaded the Mac version, so that the License seems invalid. I would be very grateful if someone could help me solve this problem.
thank you in regards
Posts: 2
Participants: 2
Read full topic
↧
↧
October 20, 2019, 5:42 pm
↧
October 21, 2019, 1:55 am
@sweetclarakim wrote:
In this 1.6mm thickness Mesh modeling, when I export to the STL file, small holes appeared.
How can I remove these holes?
Thanks in advance.
Regards,
Clara Kim
Posts: 2
Participants: 1
Read full topic
↧
October 22, 2019, 12:13 am
@kalmdown wrote:
I thought this was going to be easy but I can’t figure out what is going on.
Am trying to map the following textures onto this booth.
I planar mapped the 4 faces I wanted mapped, selected the faces individually and applied the material that has the texture. The textures are the same proportion as the surfaces they are being applied to.
The textures on the left/right are flipped and the textures on the end are…I don’t know.
Also not sure why I am getting this strip. The texture is the exact size of that wall and the map is snapped to the whole wall.
Not sure how to diagnose the problems because, as far as I can tell, I’ve done the steps correctly.
Any direction is appreciated!
Posts: 1
Participants: 1
Read full topic
↧
